BOBCAT Error Code Logo

Bobcat 463 M7472 Error Code

M7472 Fault Code Meaning :

Gateway Controller In Boot Code

Main Controller Needs Programming

Main Controller Software Incompatible

M7472 Error Code

Main Controller Software Incompatible is the main cause of M7472 error.This code can lead to engine failure if the issue is not addressed. Working with a maintenance professional is crucial in order to review and address signs of overheating on your vehicle. In the long term, this can prevent failure at a critical time.

Bobcat 463 Photo

Tip For 463 Model

Before beginning operation, inspect the work area for unsafe conditions.

Look for sharp drop-offs or rough terrain. Have underground utility lines (gas, water, sewer, irrigation, etc.) located and marked. Work slowly in areas of underground utilities.

Remove objects or other construction material that could damage the excavator or cause personal injury. Always check ground conditions before starting your work:

- Inspect for signs of instability such as cracks or settlement.
- Be aware of weather conditions that can affect ground stability.
- Check for adequate traction if working on a slope.

About | Contact | Privacy

Copyright © 2019 All rights reserved.

Bobcat Error Code

This website is not official or registered website. Please go official Bobcat website.

Sitemaps : 1-2-3-4-5